The problem of safety of plastic blowing machine must not be underestimated

Blown film machine operators must adhere to abide by the regulations of the company, usually to learn much more standard operation method, blown film machine grinds only to learn from colleagues and leaders experienced more, the temperature control technology of blown film machine blown film machine working temperature control technology to be read. The operating personnel of the film blowing machine should have strict execution ability. The tasks and requirements assigned by the superior must be completed according to the requirements.

In the course of operation, the operators of the film blowing machine should operate according to the operating procedures and procedures in the instruction book, and make the record and record of cleaning and maintenance equipment. According to the charge of the prescribed ingredients (fang), to the warehouse to sign the original auxiliary materials, and timely report to the supervisor to confirm, to make sure that the signature is confirmed, otherwise the log will not be good.

This is a key, blown film machine operators in the feeding process, according to the quality control program of getting the product first inspection, checking work (self) and record, participate in the workshop technical quality analysis, all of this flight is not qualified to implement corrective and preventive actions.

The operator of dalian plastic film blowing machine should follow the equipment maintenance code of the leader, carry out maintenance and overhaul of the equipment on time, and cooperate with the machine repair group to troubleshoot equipment. The film - blowing workshop takes turns on duty daily, which is to clean up the sanitary and make civilized production. If shift work, the production record of each class should be done, must mark the mark or record to the object need to mark, the formalities of succession must be done well, avoid the follow-up question.

Wear safety protective clothing before work. Clean the environment around the equipment and do not store anything unrelated to production. Clean the table and equipment inside and outside, use clean cotton yarn to clean the guide rail of the injection seat and the pull rod. Check all control switches, buttons, electrical wiring, operating handles, hand wheel for any damage or malfunction. The switches and handles should be in the "broken" position. Check whether the safety protection device of all parts of the equipment is in good condition, and the work is sensitive and reliable. Check whether the test "emergency stop" is effective and reliable, whether the safety door is flexible and whether the switch can trigger the limit switch. Safety protection devices on equipment (such as mechanical locking rods, locking plates, safety switches, etc.) are not allowed to move freely and are not allowed to be modified or deliberately disabled. Check whether the screws of all parts are tightened, whether they are loose, find out the parts are abnormal or have the damage, should report to the foreman, the foreman will handle or inform the maintenance personnel on their own. Check whether there are foreign objects in the hopper. No items should be stored above the hopper. The hopper cover should be covered to prevent dust and debris from falling into the hopper.